Car is now gone. PARTS REMAIN THOUGH! Updated 11-18
- KFLO 93 GT
- Registered User
- Posts: 846
- Joined: Thu Jul 25, 2002 2:46 am
- Location: Iowa
- Contact:
Re: 30 DAY 94 Beretta BASE Parts Sale!!! PICS UP!!
Man, I'm fucking baffled by how rare these little buggers are turning out to be. I thought I was extreme about weight reduction... 


93 GTs
-
- Registered User
- Posts: 535
- Joined: Fri Oct 29, 2010 8:52 am
Re: 30 DAY 94 Beretta BASE Parts Sale!!! PICS UP!!
They should pop off with a flat blade screw drive.
I would use alot of wd-40 on the ones under the hood.
There is a 10mm bolt on the T clamp that holds them down.
Inside pull back the carpet and there are two screw in the firewall.Then two horse shoe clips for the shifter should pop off with a flat blade.I would pull them though the inside of the car out.I noticed they mount alittle different on that car then mine.So im not 100% they will work for me
I would use alot of wd-40 on the ones under the hood.
There is a 10mm bolt on the T clamp that holds them down.
Inside pull back the carpet and there are two screw in the firewall.Then two horse shoe clips for the shifter should pop off with a flat blade.I would pull them though the inside of the car out.I noticed they mount alittle different on that car then mine.So im not 100% they will work for me
Re: 30 DAY 94 Beretta BASE Parts Sale!!! PICS UP!!
Well, once I get them free here the first of the week, will get better pics.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: 30 DAY 94 Beretta BASE Parts Sale!!! PICS UP!!
Hey I need the dome light cover, and the inner plastic please! The plastic piece that snaps into the roof. Mine is broke. I need that isn't broke
Sent from my PC36100 using Tapatalk
Sent from my PC36100 using Tapatalk
-Shawn
Been on the Beretta Forums since '04

94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04

94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
-
- Registered User
- Posts: 325
- Joined: Fri Dec 17, 2010 10:35 am
- Location: IN
- Contact:
Re: 30 DAY 94 Beretta BASE Parts Sale!!! PICS UP!!
are the carpet stays broken or damaged? if not i will buy them i need them for my z. please let me know i have cash on me.
"Berettas are like a sickness...and it's incurable." quoted from woody90gtz
96 z26, 3500 swap, currently awaiting Holset HX35
,also 96 beretta, 3400 swap, rebuilt trans, 15.2 choked up with 3100 older uim & lim.
96 z26, 3500 swap, currently awaiting Holset HX35

Re: 30 DAY 94 Beretta BASE Parts Sale!!! PICS UP!!
Far as I know. But clarify for me where the "stays" are. lol I feel like an idiot but not sure what parts those are! I'm assuming they are the door sill covers? The gray ones, not the black step piece.. Those all looked good though. Once I find out what exactly I will double check though.13's or bust wrote:are the carpet stays broken or damaged? if not i will buy them i need them for my z. please let me know i have cash on me.
The whole light is yours, once I pull it. Worth 20 bucks shipped?SummitBalt08 wrote:Hey I need the dome light cover, and the inner plastic please! The plastic piece that snaps into the roof. Mine is broke. I need that isn't broke
Sent from my PC36100 using Tapatalk
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


-
- Registered User
- Posts: 325
- Joined: Fri Dec 17, 2010 10:35 am
- Location: IN
- Contact:
Re: 30 DAY 94 Beretta BASE Parts Sale!!! PICS UP!!
Theyre the one with i wanna say 5 screws in them they run along the door, Theyre like straight nd than curve with the door jamb. How are the kick panels also? i need just the pass one nut ill buy both from you if theyre in good shape. Lmk thanks.
"Berettas are like a sickness...and it's incurable." quoted from woody90gtz
96 z26, 3500 swap, currently awaiting Holset HX35
,also 96 beretta, 3400 swap, rebuilt trans, 15.2 choked up with 3100 older uim & lim.
96 z26, 3500 swap, currently awaiting Holset HX35

Re: 30 DAY 94 Beretta BASE Parts Sale!!! PICS UP!!
Kick panels are there, no rips, but need a good cleaning. Once I get a chance monday or tuesday, I will pull the stuff and look it over. The sill covers (stays) and the kick panels I can probably do shipped for.... 50?? Just have to come up with a big enough box.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: Re: 30 DAY 94 Beretta BASE Parts Sale!!! PICS UP!!
The whole light is yours, once I pull it. Worth 20 bucks shipped?[/quote]SummitBalt08 wrote:Hey I need the dome light cover, and the inner plastic please! The plastic piece that snaps into the roof. Mine is broke. I need that isn't broke
Sent from my PC36100 using Tapatalk
Sounds good! Send me a pm with your paypal if you got one... One more question as I just thought of it.. is the spare tire bolt any good in that car? The bolt that you put the wing nut thing on to hold the spare and spare cover down? If the whole spare cover isn't bent I will take the whole thing
Sent from my PC36100 using Tapatalk
-Shawn
Been on the Beretta Forums since '04

94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04

94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Re: 29 DAYS REMAIN ON THIS SALE OF 94' RED BASE BERETTA PART
I will have to check on that one, the spare is on the car at the moment. No promises.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: 29 DAYS REMAIN ON THIS SALE OF 94' RED BASE BERETTA PART
Are the head lights clear? How are the door handles? And what are those things called? Sail panels?
keep'em flying!
Re: 30 DAY 94 Beretta BASE Parts Sale!!! PICS UP!!
its a plastic piece that keeps the boot on to the shift plate.KFLO 93 GT wrote:I'm talking the plastic plate that snaps into the console. Then the shift boot that is hopefully bolted to that plate via the metal retaining ring (the retaining ring deal is what I really want and need, but there is no need to separate because I'll buy all 3 pieces). Don't need the lighter well or trunk release button, but you can leave them in if you don't want to pull them, I don't care. I Don't need the shift arm or knob either.
Hope that helps.
Re: 29 DAYS REMAIN ON THIS SALE OF 94' RED BASE BERETTA PART
Actually once I washed the car, the lights looked pretty good. In fact I was planning on keeping them, but I would let them go for 50 shipped. No cracks that I could see, just need small bit of polish, but they would work fine. I was actually going to try a secret project with those, but it can wait. LOLMoney pit Beretta wrote:Are the head lights clear? How are the door handles? And what are those things called? Sail panels?
Up to you, no worries either way. If you want them, just let me know. As for the other items... Driver's side door handle looks to be good. Passenger side handle is broken off. Sale panels are the ones that cover the area on the rear jamb forward of the rear side widows, correct? Or is it the piece that goes over the door handle mechanism above the door latch on the door itself? Both are plastic, I can check them for cracks.
Update for the rest of you!
I plan to be taking things apart off the car tomorrow that have already been requested for. Once I have verified that some of these parts are good and useable they will be made ready for shipments once payments are processed. I am also updating the main thread tonight, redoing it so that you all have a clear idea of what is there, what isn't, and what the condition the parts and what I will do for you guys during this process.
Thanks for your patience as I re work the first post.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Re: 29 DAYS REMAIN ON THIS SALE OF 94' RED BASE BERETTA PART
Updated first post!!! Thanks!
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: 28 DAYS REMAIN ON THIS SALE OF RED BASE PARTS!!! - REVIS
Ok what were you going to sell the new head lights for? Just checking. If the ones off of this car are clear I'll take them. Mine are great on the outside, but have a crust on the inside. I sanded the crap out of the outside.
I could use the divers side door handle as long as it's not all scratched up.
If the sails or whatever(things that have the coat hanger, on the inside) are gray and not faded I could use them too. They turn a little green when they get too much sun.
I could use the divers side door handle as long as it's not all scratched up.
If the sails or whatever(things that have the coat hanger, on the inside) are gray and not faded I could use them too. They turn a little green when they get too much sun.
keep'em flying!