Car is now gone. PARTS REMAIN THOUGH! Updated 11-18

[Amateur]

How much for the shifter/selector cables?
and if you have both door/trunk locks w/ key for the car, how much for those?
(I can't lock my car because both locks are inoperable. so this would be awesome)

[DTMAce]

Ok what were you going to sell the new head lights for? Just checking. If the ones off of this car are clear I'll take them. Mine are great on the outside, but have a crust on the inside. I sanded the crap out of the outside.
I could use the divers side door handle as long as it's not all scratched up.
If the sails or whatever(things that have the coat hanger, on the inside) are gray and not faded I could use them too. They turn a little green when they get too much sun.

Ok a few clarifications:

I took a closer look at the headlights. They are not perfectly clear, but from what I can see most of the problems are external. I didn't see a "crust" internally. There are no lamps in the lights either, apparently they have been removed previously. I was looking for 50 shipped, as I kinda had a crazy idea to do something with them otherwise. If that seems high, that's ok. I will get you some nicer pics of them soon.

You want the external handle correct? I will probably pull the entire unit as one piece.

Now the part that has the coat hanger on it, has two halves, both upper and lower. Are you wanting just the upper halves? Or both? I took a look, they look ok, outside of a good cleaning. I didn't know they turn green with sun, mine certainly haven't, and its outside a lot. Unless I just can't see it. But these look like mine as for the color.

I will have a host of updates and pics to follow later today. Airing the car out at the moment, its smells pretty bad with the wet floor in there.

How much for the shifter/selector cables?
and if you have both door/trunk locks w/ key for the car, how much for those?
(I can't lock my car because both locks are inoperable. so this would be awesome)

Shifter stuff is already on the pending list, sorry. If 3 others before you don't want them, then you can have them.
As for locks. I suppose they could all be pulled, I haven't tested them all, but I know the trunk one works great.

Will update you later as well.

[Money pit Beretta]

Did seem a bit high, but mine are making me sick. Yes, the outside handle(the whole thing). Just the upper halfs on the "sail", broke the mounts on mine changing speakers.
One of my front pillers has a green tint(passenger side), guess I could use that too.

[sp33d1nc0rs1ca]

pm me a price on both kick panels w/ or w/o speakers doesn't matter. MAP sensor off the 2.2l. both black mirrors. right side inner mirror cover that the mirror adjustment knob goes through. turn signal lever. cruise or not doesn't matter. need a price shipped to 17047. all together. thanks man. oh and whats up with that photo project? pm me.

[DTMAce]

I got side tracked this evening installing a stereo and extra amp/speakers into a 90 something chevy full size. Ugh. Screwed me on getting a lot torn apart on the base, but I did get some things done:

Did seem a bit high, but mine are making me sick. Yes, the outside handle(the whole thing). Just the upper halfs on the "sail", broke the mounts on mine changing speakers.
One of my front pillers has a green tint(passenger side), guess I could use that too.

I will be pulling those tomorrow at some point, and get pics for you of everything. We can go from there.

pm me a price on both kick panels w/ or w/o speakers doesn't matter. MAP sensor off the 2.2l. both black mirrors. right side inner mirror cover that the mirror adjustment knob goes through. turn signal lever. cruise or not doesn't matter. need a price shipped to 17047. all together. thanks man. oh and whats up with that photo project? pm me.

Sure. So we have kick panels without speakers, MAP sensor, (going to have to tell me where that is located), both mirrors. Those are actually a good deal, they are in really nice shape, I think there is a scuff on the driver's side one, but nothing broken. You will get all the parts, internal, external, not going to separate that stuff. Turn signal, you need JUST the lever, right? There is no cruise on this one.

Hey I need the dome light cover, and the inner plastic please! The plastic piece that snaps into the roof. Mine is broke. I need that isn't broke

The whole light is yours, once I pull it. Worth 20 bucks shipped?

Sounds good! Send me a pm with your paypal if you got one... One more question as I just thought of it.. is the spare tire bolt any good in that car? The bolt that you put the wing nut thing on to hold the spare and spare cover down? If the whole spare cover isn't bent I will take the whole thing
Sent from my PC36100 using Tapatalk[/quote]

Ok, I pulled those items for you today, everything is good to go. Light was cleaned, but looks very close to new. No cracks, discoloration, and nothing is broken. Even has a good bulb. Spare bolt is in really nice shape, a small bit of rust (surface and slight) and will come with the plastic support panel and the top latch hold down cap. The trunk panel is toast. Mildewed bad. So no point in it.

Pics for you Summit:



If that all looks good for you hit my paypal dtmace@msn.com and send me 20 bucks. I will ship those out tomorrow.



Ok, one other thing turned up in the trunk, and I about fainted. (Cause it is a mess in there)

This:



Actually I just noticed that one end of one of the brackets is missing its plastic cap. And slightly tweaked. If I come across it, I will add it in, but otherwise that's all.

20 bucks shipped and its yours! If adding it to other stuff you are already buying, then its 15 bucks.

One other thing I forgot to mention, the foam brick that holds the jack and stuff is also still in the car, along with the jack. Looks like its all in decent shape and intact, if anyone wants that, add 15 to your order or 20 bucks shipped by itself. Should have time to get a lot more pulled tomorrow and put up more pics guys. Thanks for being patient!

[DTMAce]

Updated first post, always review it to know what is there and what is pending, sold, etc. I may start to list stuff I know is worth buying as I go beginning tomorrow or Wed.

[sp33d1nc0rs1ca]

pm me a price on both kick panels w/ or w/o speakers doesn't matter. MAP sensor off the 2.2l. both black mirrors. right side inner mirror cover that the mirror adjustment knob goes through. turn signal lever. cruise or not doesn't matter. need a price shipped to 17047. all together. thanks man. oh and whats up with that photo project? pm me.

Sure. So we have kick panels without speakers, MAP sensor, (going to have to tell me where that is located), both mirrors. Those are actually a good deal, they are in really nice shape, I think there is a scuff on the driver's side one, but nothing broken. You will get all the parts, internal, external, not going to separate that stuff. Turn signal, you need JUST the lever, right? There is no cruise on this one.

Correct. the turn signal lever only, kick panels, both mirrors, and the MAP. can i shoot you a pic msg or an email tomorrow with a pic of it?

[DTMAce]

Correct. the turn signal lever only, kick panels, both mirrors, and the MAP. can i shoot you a pic msg or an email tomorrow with a pic of it?

Sure, that will help. I have a fair idea, just want to be sure I get the right part.

[sp33d1nc0rs1ca]

Pics are comin your way via email. Let me know if ya got em.

[DTMAce]

Summitbalt your items have shipped. More of you will be getting items as I get stuff taken apart.

[NMBeretta]

I need the molding right under the driver side mirror

[DTMAce]

You mean the part before the dew strip? Basically the short piece directly under the mirror? Cause the section where the dew strip is, I planned to keep. But I can let that smaller section go if you need it.

[NMBeretta]

I need the smaller section and whatever is on the backside to attach it to the car

[ErichZ26]

are you taking the welded on transmission mount off this? At least front.

[DTMAce]

I need the smaller section and whatever is on the backside to attach it to the car

Ok, no problem. Anything else?

are you taking the welded on transmission mount off this? At least front.

Nope. If removing a part is going to require a torch, it isn't coming off. Sorry. But its a good idea, I will think about it. May need that part myself someday, but there is a lot of rust on crap under there.