Removing brake rotor?

96B-Mike · Post by **96B-Mike** » Thu Sep 22, 2011 10:53 am

What size is the bolt in order to remove the brake rotor? I dont have a set of tools to try one by one (friend of mine owes me a favor lol)

Post by **3X00-Modified** » Thu Sep 22, 2011 10:55 am

remove tire and remove caliper with 3/8 hex head socket.

Looks like this

Barry · Post by **Barry** » Thu Sep 22, 2011 12:07 pm

Yeah, we dont have rotor retaing bolts or caliper brackets holding us back. Just pull the caliper off and your good to go

96B-Mike · Post by **96B-Mike** » Thu Sep 22, 2011 12:40 pm

Oh okay good, thanks guys

pghturbo88 · Post by **pghturbo88** » Thu Sep 22, 2011 7:32 pm

I believe my 89 caliper bolts are Torx, T-50 if memory serves me. Remove the dust caps and use a mirror to see what you have.

SuzukiGhostRider · Post by **SuzukiGhostRider** » Thu Sep 22, 2011 9:00 pm

Yup, my '87 has Torx head as well.

Post by **3X00-Modified** » Thu Sep 22, 2011 9:04 pm

His car is a 96, so that wouldn't apply.

scd88ga · Post by **scd88ga** » Fri Sep 23, 2011 6:49 am

This does apply... Some aftermarket companies use torx, some use hex for replacements, same as the factory using both kinds! The only way to know is too look! I usually just reach around the tire and jam my finger in the bolt for a few seconds then look at what shape indent is in my finger! lol

96B-Mike · Post by **96B-Mike** » Fri Sep 23, 2011 11:37 am

everything went smoothly..thank you

Beretta.net

Removing brake rotor?

Removing brake rotor?

Re: Removing brake rotor?

Re: Removing brake rotor?

Re: Removing brake rotor?

Re: Removing brake rotor?

Re: Removing brake rotor?

Re: Removing brake rotor?

Re: Removing brake rotor?

Re: Removing brake rotor?

Connect with your social network account