Do I even dare??? I guess so, getting it later this week!
Re: Do I even dare??? I guess so, getting it later this wee
I remember my 89 cav.. It had the 2.0. Looked just like that, if memory serves.... And it ran good, even if it was a dog with a boat anchor. (mated to an auto on a 4 door, it sucked)
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
Re: Do I even dare??? I guess so, getting it later this wee
Yeah, the 2.0 OHC was a real dog. I'll attest to that as well. Great motor, aside from popping headgaskets as bad as the 2.2 and 2.3 are known for (funny though , only the Quad got the infamous rap for headgaskets but all three motors were known for it). As to the injector issue I've seen a few people having trouble with them on them 2.2L. I haven't personally dealt with it. I'm trying to remember his name, I think it's Dustin? On here , he just mated a 5 speed to his 2.2L and it's marron with nice wheels, lowered. He had some major issues as I recall with his fuel injection. Maybe check with him? I just remembered it was an ongoing thing. Maybe not REAL common, but something I've heard of more than a few times.
Re: Do I even dare??? I guess so, getting it later this wee
Sounds like what happened with this one, is that maybe the headgasket went, it overheated and that was it. According to the owner, the word seized was used, but no way for me to know that yet. Obviously I will be checking the oil, etc. Now once I get it home hopefully by Thursday, give it a bath and throw a batt in it, and see what I have, I will go from there. May try to crank it over, see if its thunking or something. I would crap my pants if it fired up. Worst case with the engine, I go find another one. This is literally going to be a major fail or a minor one. Either way I probably can get back what I'm putting into it at the moment or more if I can't make it road worthy.

Otherwise, I will join the multiple beretta RUNNING owner club. Yeah the one where people own more than one beretta at the same time that are drivable, licensed and actually driven.. LMAO

Otherwise, I will join the multiple beretta RUNNING owner club. Yeah the one where people own more than one beretta at the same time that are drivable, licensed and actually driven.. LMAO
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
Re: Do I even dare??? I guess so, getting it later this wee
You can tell if it is locked up. Put a proper size socket and wrench on the crank pulley bolt and turn it clockwise ( the engine's direction of rotation ) and if it refuses to budge it's more than likely seized up. If it moves try to get two full rotations which should cover the engines full combustion cycle. If it turns part way then sticks, odds are there is a valve bent and open and one of the pistons is hitting it.
But if they got it as hot as it sounds, they likely seized the crankshaft bearings. At that point, I'd just scrap that motor and buy Chad's or a salvage yard motor.
But if they got it as hot as it sounds, they likely seized the crankshaft bearings. At that point, I'd just scrap that motor and buy Chad's or a salvage yard motor.
Re: Do I even dare??? I guess so, getting it later this wee
Not like bearings can't be replaced, crankshafts redone and that... lol
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


-
- Registered User
- Posts: 1068
- Joined: Sun Nov 02, 2003 11:54 am
- Location: Paulden, AZ
- Contact:
Re: Do I even dare??? I guess so, getting it later this wee
Your point is valid Chris, but i have very rarely seen where someone cooked a crank and was able to save it. 99% of the time, its messes up the crank journals and rod journals and cuts them up pretty badly. If the motor is seized, i 1000% guarantee you, Chads motor with be the cheapest/best option for you.
Geoff
95 Base V6: Current Project; Work In Progress
95 Base V6: Current Project; Work In Progress
Re: Do I even dare??? I guess so, getting it later this wee
Oh I know. Don't worry, rebuild only if feasible, replacement is the second option, providing the rest of the can be road worthy.


94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Re: Do I even dare??? I guess so, getting it later this wee
Small change of plans. Picking it up Monday evening.

Once I have it here, I will be starting a new thread in the appropriate section.

Once I have it here, I will be starting a new thread in the appropriate section.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
Re: Do I even dare??? I guess so, getting it later this wee
Good luck. I love taking on projects myself, just in case you guys hadn't noticed,lol. I get what you're doing. 

Re: Do I even dare??? I guess so, getting it later this wee
Stopped at a local yard, that really never has much. Actually found 3... 2.2 engines. Only 1 of which is probably any good, its in a sunfire, but it has an ignition problem, most likely the coil pack. There was a early 90 something cav with a 2.2 out of a corsica... Wanted it, but it has a cracked block, so no point. lol
The other was another sunfire that was all beat to hell. Engine was dead in it too though.
The other was another sunfire that was all beat to hell. Engine was dead in it too though.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Re: Do I even dare??? I guess so, getting it later this wee
i own 2 GTZ'S, there are both legal and licensed, and both get driven, both white 91's, the quad needs an exhaust and i havnt found a decent shop to do it the way i want it, and the v6 gtz needs a tune up and power steering line. and the girlfriend has a red 91 quad gtz in mint condition... wich im currently driving... lol. so i think my family of 3 gtz's has you beat!DTMAce wrote:
Otherwise, I will join the multiple beretta RUNNING owner club. Yeah the one where people own more than one beretta at the same time that are drivable, licensed and actually driven.. LMAO


1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
Re: Do I even dare??? I guess so, getting it later this wee
Not for long apparently. I have a line on being able to acquire 2 more beretta's, ones a 96 adriatic blue 2.2 5 speed.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Re: Do I even dare??? I guess so, getting it later this wee
Forget the Adriatic blue. Its a majorly beat POS. In some ways it needs as much work as the one I have being parted out, and the guy wanted 750 for it. Clutch hydraulic is toast (bad line or something) big ass rust hole in the pass side above the rear fender, duct taped sunroof, fucked up back seat, all pulled out like the red base was.... Filthy, needs lots of things replaced, ass end can wobble back and forth pretty bad (side to side). Weird strips put on the decklid edges, just... Messed up! It did seem to run ok, but... Nice enough guy, but wow.
I think I know where I will be getting another one though. Have to talk to the guy first. lol
I think I know where I will be getting another one though. Have to talk to the guy first. lol
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan


Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

